Computer Network

Enhanced Interior Gateway Routing Protocol (EIGRP)

Using Dual Algorithm Advance distance vector or mixed IP header protocol : 88 VLSM and CIDR AD(Administration distance) = 90 Metrics : bandwidth、delay、(loss load MTU) Trigger update : (Incremental update, reliable update) Type of Packet that used : Hello, Update, Ack, Query, Reply The three tables that EIGRP uses in its operation: The neighbor table lists adjacent routers. The topology table lists all…

IPV6 Route

R1 Config : SW Config : VPC Config : VPC ping 2012::1 and 2012::2

Dynamic Host Configuration Protocol (DHCP)

First Experiment : Make the switch as the second layer protocol. R1 Config : Connecting the R1 and R2 R1 Config : Second Experiment : R5 Config: VPC10 ping 12.1.1.20 VPC10 ping 10.1.1.2, first set the ip route on R5. Ping success ! VPC10 ping 10.1.1.10, first set the ip route on R7. Ping success…

Static Routing

Add the ip addres to every interface on the router. Now every route has been connected, you can see it by run the command “do show ip route” All router have been connected, if the connection suddenly shutting down on the R1 e0/0, EVE can automatically make R1 e0/1 as the line to connecting to…

Build a network using EVE-NG and VMware

EVE-NG PRO is a the first clientless multivendor network emulation software that empowers network and security professionals with huge opportunities in the networking world. In this tutorial we will explain how to build a network using EVE-ng and VMware. We assume that all of you have already install the EVE-ng on the VMware. So, the…